Condenser Microphone - C 2000 B

The "entry level" model for anyone looking for an affordable high quality recording microphone. Its almost ruler-flat response provides a crystal-clear, "up-front" sound. A switchable bass rolloff filter for eliminating proximity effect and a switchable 10-dB preattenuation pad let you adjust the microphone's response to all recording or live miking situations. A built-in pop screen reduces unwanted noise that may be caused by plosive sounds if you use the microphone extremely close-in. The supplied H 100 spider type shock mount reduces unwanted footfall noise that may be transmitted by the microphone stand. Rugged construction, an elegantly styled die-cast metal housing, and silver-gray finish add to the professional level quality of the C2000 B.

Polar patterns: cardioid
Frequency range: 30­20,000 Hz
Sensitivity: 20 mV/Pa (-34 dBV) Max. SPL for 0.5 %
THD: 140/150 dB
Equivalent noise level: 20 dB-A
Signal/noise ratio (A weighted): 74 dB
Preattenuation pad: -10 dB, switchable
Bass cut filter: 6 dB/octave below 500 Hz
Electrical impedance: 200 ohm
Recommended load impedance: >1,000 ohm
Power requirement: 9 to 52 V phantom power to DIN 45596
Current consumption: <2 mA
Connector: 3-pin male XLR Cable length: -
Finish: silver gray
Size: dia.: 53 mm (2.1 in.); length: 159 mm (6.3 in.)
Net/Shipping weight: 325/950 g (11.5 oz./2.1 lbs.)
Standard accessories: H 100
Optional accessories: B 18, PF 100, MK 9/10, SA 41/1

AKG Acoustics, 1449 Donelson Pike, Nashville, TN 37217. Tel: 615-360-0499; Fax: 615-360-0275.