Model 2600 Multichannel Video Monitoring System
Source: Data Check Corp.
The rack will contain six 2.5 inch LCD color displays on a panel that will tilt +- 20 degrees.
Features
The rack will contain six 2.5 inch LCD color displays on a panel that will tilt +- 20 degrees.
- 6 LCD Color Display in 2 rack units
- Less than 11 inches Deep
- Internal/External or Master sync. Input
- Low Power Consumption (12VDC Input)
- Blue Field/Color Kill Front Panel Control
The rack will contain six 2.5 inch LCD color displays on a panel that will tilt +- 20 degrees.
Dimension:
H 3.5" (2RU), W 17" (standard 19" RACK) , D 12"
Power:
12 +- 1 VDC @ 5 AMPS max.
Optional 115/230 VAC 50/60Hz
Interface:
Each channel position will have two 75 Ohm BNC connectors and one 2-position switch.
LCD/TFT Display (6 per chassis)
- Signal: Composite Video, either NTSC or PAL
- Level: 1 V PP
- Impedance: 75 Ohm
- Active Area: 2.5" Diagonal
- Pixel Arrangement: 160 x 234, delta
- Pixel (RGB) Trio Pitch: 0.106 (H) x 0.157 (V) mm
- Brightness, typical, 0 o : 190 nts
- Contrast Ratio, 0 o : 160:1
- Viewing Angle, contrast >10:1: +55 o H; + 15 o , -35 o V
- Response Time, max (t,/t,): 30/50 ms
- Light Source (standard): CCFL
- Window (Display Area): 2.03'' (H) x 1.48" (V)
- 1. 75 Ohm composite video input.
- a. Uses two BNC connectors.
b. Passive Loop Thru with 75 Ohm Termination switch.
3. Brightness, contrast, color/tint controls on front panel.
4. Blue field on/off and color kill on/off on front panel.
Data Check Corp., 9918 Via Pasar, San Diego, CA 92126. Tel: 818-373-5492; Fax: 818-373-5446.
This website uses cookies to ensure you get the best experience on our website. Learn more