Product/Service

Multichannel composite encoder

Source: Evertz

Multichannel composite encoder
The Multivert, a 10 channel composite encoder was designed for monitor wall applications where multiple SDI component video signals need to be converted to composite analog...
The Multivert, a 10 channel composite encoder was designed for monitor wall applications where multiple SDI component video signals need to be converted to composite analog. The Multivert is the most cost effective method of monitoring on a per channel basis as it houses 10 converters in a 1RU frame as well as a redundant power supply. Each of the ten channels has two composite analog video outputs as well as a single regenerated SDI component video output.

The Multivert proves itself to be a much better alternative to the use of expensive dongle based converters that use wall mounted or brick based power supplies.

The Multivert is a compact 1RU, 7.75 inches deep, rack mountable frame with both front and rear panel LED status displays for each of its ten channels. Thanks in part to it's compact size, the Multivert is capable of being mounted in the rear of the monitoring wall equipment rack. Further, by having status LED's on both the rear panel as well as the front panel, it allows the cables to be installed facing the rear of the rack thus providing for both status monitoring as well as convenient cabling.

Having the Multivert mounted in the rear of the monitor racks will eliminate the need for long analog cable runs from modular converters in the equipment rack room to the monitors. Thus eliminating the need for analog equalizing DA's.

Evertz, 3465 Mainway, Burlington, ON L7M 1A9. Tel: 905-335-3700; Fax: 905 335-3573.