Silencer

Acoustical Solutions Inc.r both OEM and retrofit applications, the rugged four (4") inch deep AlphaLoc Flatpac Silencer may be easily located behind ventilation louvers, over enclosure openings and in the inlet or discharge plane of a fan or blower. In weatherized installations, the Flatpac Silencer may be furnished with sealed media, stainless mesh or a reactive design with no media nor fibrous materials at all. For decorative purposes, the Silencer face may be finished with an attractive grille, louver and/or screen. A wide range of aerodynamic and acoustic criteria may be accommodated within the family of silencer configurations.

Flatpac Silencers may be equipped with an optional air filter to provide an economical, environmental control and silencing system in the same area required by a filter alone. An integral filter/silencer assembly will accept prefilters, intermediate or final filters for air quality and microcontamination control. Noisy control consoles, circuit card chassis and equipment enclosures can be soundproofed and ventilated utilizing the Flatpac silencing system..

Alternatively, complete enclosures may be assembled from Flatpac Silencer modules to trap noise internally while providing free air movement around and through the enclosed equipment. Also, the Alphaloc Flatpac silencer may be used in HVAC and heat pump systems, between transfer grilles, behind diffusers and in equipment rooms to reduce undesirable noise.

The Flatpac Silencer is available in an infinite variety of sizes. Individual modules may be as small as six (6") inches square and frow in both length and width to a maximum dimension of forty-eight (48") per side. Modules may be joined to form larger silencer banks as required.

<%=company%>, 3603 Mayland Ct., Richmond, VA 23233. Phone: 804-346-8350; Fax: 804-346-8808.