Product Showcase

  1. Non-Blocking RF Switch Matrix
    4/15/2015

    A non-blocking RF switch matrix is more complex than the blocking type, but it’s also more flexible. In this configuration, an input can be switched to multiple outputs. One input can in fact be switched to all of the outputs at once. This provides an extra degree of flexibility compared to the blocking architecture. However, a non-blocking architecture still has the limitation of not allowing two or more inputs to be switched to the same output. Input 1 for example can be simultaneously switched to every output or selectively switched to several outputs at once, but no other input can be switched to any of the same outputs.

  2. Connectorized Ceramic Diplexers and Multiplexers
    3/17/2015

    Ceramic diplexers and multiplexers offer performance benefits that fall between Cavity and Lumped element diplexer capabilities and characteristics. Most often, they’re used because of a system’s size constraints. Ceramic diplexers are offered as non-hermetic surface mount designs or in hermetic housings with connectors.

  3. Diplexers/Multiplexers with Reduced Prototyping
    2/27/2015

    Diplexers and multiplexers are used to either separate or combine two different frequencies that are similar in range to one another. While bandpass filters can also be used to combine and separate signals, they’re only ideal for use with frequencies that are far apart from one another.

  4. RF Switch Matrix: RFMS-4X256-B
    8/1/2014

    Corry Micronics’ RFMS-4X256-B is a 4 to 256 blocking RF switch matrix covering the 900-2500 MHz frequency range. It has a -8dB insertion loss, 50 ohms impedance, 10 dB return loss, +30 dBm P1dB, -80 dB isolation, and a 5µs switching speed (50% trigger to 10% RF power).

  5. Low Pass Filter: CMILPF-1990-80S
    4/24/2014

    This is a low pass filter for the record books. With the connectors, it measures over 19 “in length. The pass band is 50MHz to 1990 MHz with less than 1dB of pass band insertion loss. It took over 39 poles to meet the rejection requirements of greater than or equal to 80dB at 2140MHz to 3600MHz.

  6. Filtered Micro D-Sub Adapters
    3/25/2014

    Corry Micronics has offered industry-standard filtered d-sub adapters for over a decade now. They’re now moving into micro d-sub adapter offerings due to customer demand, as other suppliers of similar products are adopting higher prices and offering poor lead times.

  7. Safe-Guard RF Switch
    12/10/2013

    This RF switch has been designed to attenuate the RF transmit signals up to 12dB or to a reduced power level of 6.3% of the original power. It’s particularly well suited for the oil and gas industry.

  8. Custom Hi-Voltage Filtered Medical Connectors
    1/17/2013

    By applying high-voltage resistive ink banding using a patented banding process, these medical connectors are able to withstand the 5,000 VDC hi-pot breakdown required for defibrillation monitoring and medical diagnostic equipment. 

  9. Ultra-Broadband Low Loss Power Divider
    10/11/2012

    Corry Micronics has developed a 6-way ultra-wide band power divider that has a typical insertion loss of 2 dB with a frequency range from 800 MHz to 18 GHz. The 6 way power divider is rated at 30W CW or 5W CW per input channel. The design is compact and rugged.

  10. Standard Gain Horn Antennas
    2/7/2012

    Corry Micronics' Gain Horn Antennas operate in the sub-gigahertz to over 100 GHz frequency range. These antennas can be custom manufactured for different applications, including but not limited to aerospace, military, wireless communications, and medical.