Downloads
-
900 MHz/1800 MHz GSM Filter And Amplifier Module: GSMMOD-900-1800M Datasheet
5/15/2019
The GSMMOD-900-1800M is a filter and amplifier module for GMS signals in the 900 MHz and 1800 MHz bands. Designed to mount in a single slot of a four slot 3U, 19” chassis, it features separate low power level Receive and Transmit ports for interfacing to a Software Defined Radio and provides the necessary filtering to combine the receive and transmit signals onto a common output port for connection to an antenna.
-
900 MHz UMTS Filter And Amplifier Module: UMTSMOD-900M Datasheet
5/15/2019
The UMTSMOD-900M is a filter and amplifier module for UMTS signals in the 900 MHz band. Designed to mount in a single slot of a four slot 3U, 19” chassis, it features separate low power level Receive and Transmit ports for interfacing to a Software Defined Radio and provides the necessary filtering to combine the receive and transmit signals onto a common output port for connection to an antenna.
-
Integrated RF Assemblies
5/15/2019
Corry Micronics offers a new family of RF integrated assemblies designed to work across multiple frequencies in a variety of applications. These RF filter and amplifier modules feature several modulation types in a modular design structure.
-
Cellular Band Switched Filter Module With Optional Amplification: CMIINV-5BLTE-RM Datasheet
5/15/2019
The CMIINV-5BLTE-RM is cellular band switched filter module with optional switched amplification for monitoring the transmit or receive Band 1, Band 3, Band 7, Band 8, and Band 20 signals. Features include high out of band rejection specifications, high band to band isolation of 50 dB minimum, low noise figure, and standard 50 ohm impedance.
-
LTE Band 28/38 Switched MIMO Amplifier: CMIPAS-MIMOB28B38 Datasheet
4/1/2019
The CMIPAS-MIMOB28B38 is a MIMO amplifier that can be operated as a Band 38 TDD amplifier or a Band 28 FDD amplifier. For an LTE signal, the amplifier is rated for 5W average output and offers good linearity, high gain and a low noise figure. A serial digital interface provides gain control and monitoring the status of the operating parameters; forward and reverse powers, DC current and temperature.
-
LTE Band 28/38 Switched MIMO Amplifier: CMIPAS-MIMOB28B38
4/1/2019
The CMIPAS-MIMOB28B38 is a MIMO amplifier that can be operated as a Band 38 TDD amplifier or a Band 28 FDD amplifier. The specific operating mode is controlled by discrete digital bits.
-
RF And Microwave Machining Capabilities Brochure
3/18/2019
Corry Micronics offers custom machined RF and microwave housings with the fastest turn-around times in the industry. Housings will be machined to specifications within tolerances of ±001”. Housing materials include aluminum, stainless steel, brass, copper, and engineered plastics for lightweight alternatives. Optional coatings include electroless nickel, gold, silver, and white bronze.
-
RF And Microwave Machining Capabilities
3/18/2019
Corry Micronics offers custom machined RF and microwave housings with the fastest turn-around times in the industry. Prototypes will be available in less than two weeks.
-
Corry Micronics Super Speed USB3.1 Filter Module Interfaces: CFM1-USB31-AB Datasheet
1/24/2019
The CFM1-USB31-AB is designed to pass data between USB 2.0, USB 3.0 and USB 3.1 devices at up to 10 Gbps while rejecting conducted and radiated interference and noise. These products are used with an RF shielded enclosure or shielded room to isolate products undergoing testing that require an electrically quiet environment. This product will provide critical filtering for major carriers because we’ve lowered the reject band down to 500 MHz.
-
Corry Micronics Super Speed USB3.1 Filter Module Interfaces: CFM1-USB31-C Datasheet
1/24/2019
The CFM1-USB31-C is designed to pass data between USB 2.0, USB 3.0 and USB 3.1 devices at up to 10 Gbps while rejecting conducted and radiated interference and noise. These products are used with an RF shielded enclosure or shielded room to isolate products undergoing testing that require an electrically quiet environment. This product will provide critical filtering for major carriers because we’ve lowered the reject band down to 500 MHz.